It is a double walled bath with inner chamber made of S.S. & outer wall made of S.S. sheet. The gap between outer & inner walls is fitted with special grade glass wool insulation. The concentric rings can be removed to accommodate containers of various sizes. Temp. From ambient to 900 C +- 20 C is to be controlled by thermostat.

It is a double walled unit with inside made of thick S.S. sheet & outer made of M.S. sheet duly powder coated prevents failing of condensed water droplets on the specimens. Heating is achieved through immersion type heater & the temp. is controlled by hydraulic type thermostat with an accuracy of +-0.5⁰C. The bath has an oscillating tray riding on ball rollers oscillating through a greater variable speed motor. Shaking speed range between 40 to 140 cycles per minute. The shaking tray can either hold test tubes or erlynmeyer flasks of 25 ml. or 50 ml or 100 ml or 250 ml as ordered by the users.(kindly mentioned the capacity of the flasks while ordering (having temp.range from ambient to 100⁰ C) with heating

It is a double walled unit with inside made of thick S.S. sheet & outer made of M.S. sheet . thermostat with an accuracy of +-0.50C. a greater variable speed motor. Shaking speed range between 40 to 140 cycles per minute. erlynmeyer flasks of 25 ml. or 50 ml or 100 ml or 250 ml as ordered by the users Supplied complete with one shaking tray, paramedical cover, L -shaped thermometer cord & plug, (having temp. range from 5⁰ C to 60⁰C.

A high speed stirring with a motor of 1/20 H.P. is fitted to the unit for continuous stirring & thus maintaining a uniform temp. throughout. A speed regulator & digital indicator controller is provided on the front panel to control speed of the stir & temp. of bath. The heating mechanism comprises of set of heaters pertaining to faster & slower heating control the temp. with a sensitivity of +0.10 C from ambient to 1000C.To work on 220/230 volts A.C. supply.

• Chamber size : 430 x 240 x 265 mm ( Approx. 27 ltr. Cap)

These units are double walled with inner chamber made up of S.S Sheet & outside made of Stainless steel sheet. Temp. from ambient to 900C is controlled by hydraulic capillary type thermostat with an accuracy of +- 2⁰C

For unattened grinding of non gummy and non fibrous materials. Extensively used for preparing coal samples for calorific tests. The motor revolves and the pestle moves back and fourth in a pattern reaching all parts of the motar . Its metallic housing with a F.H. Motor driven detachable turn table of cast aluminium has adjustable posts to hosd mortars of 75 to 135 mm dia. Thew arm of the pestle driving mechanism has inged, heavy head which can be raised to inspect or remove the sample or additional material to be added as disered. A build -in timer permites selection of grinding operation upto 60 min. The grinding vessel and mortar are all completely covered by a clear acrylic cover . to operate on 220Volt A.C